(New Updated) PassLeader Released New Version Microsoft 70-410 445q Exam PDF And VCE Dumps (61-80)

100% Valid Dumps For 70-410 Exam Pass: PassLeader have been updated the 70-410 445q exam dumps and added the new exam questions, in the latest version of 70-410 445q PDF braindump or VCE practice test, you will get all the new changed 70-410 exam questions, which will help you 100% passing 70-410 exam, and you will get the free version of VCE Player together with your 70-410 445q VCE briandump. Welcome to visit our website — passleader.com and get your 70-410 exam passed.

PassLeader 70-410 Exam Dumps[2]

QUESTION 61
You have a server named Server2 that runs Windows Server 2012 R2. You open Server Manager on Server2 as shown in the exhibit. (Click the Exhibit button.) The Everyone group has read share permission and read NTFS permission to Sources. You need to ensure that when users browse the network, the Sources share is not visible. What should you do?
611_thumb1

A.    From the properties of the Sources folder, remove the Sources share, and then share the Sources folder as Sources$
B.    From the properties of the Sources folder, deny the List Folder Contents permission for the Everyone group
C.    From the properties of the Sources share, configure access-based enumeration
D.    From the properties of the Sources folder, configure the hidden attribute

Answer: A
Explanation:
A. need to remove the old share, $ creates a hidden share.
B. This would deny everyine.
C. This feature allows users of Windows Server 2003-Based file servers to list only the files and folders towhich they have access when browsing content on the file server.
D. This would hide the physical folder not the share.
A hidden share is identified by a dollar sign ($) at the end of the share name Hidden shares are not listed when you look through the shares on a computer or use the “net view” command Why Use Hidden Shares? Using hidden shares on your network is useful if you do not want a shared folder or drive on the network to beeasily accessible. Hidden shares can add another layer of protection for shared files against unauthorizedpeople connecting to your network. Using hidden shares helps eliminate the chance for people to guess yourpassword (or be logged into an authorized Windows account) and then receive access to the shared resource.
http://support.microsoft.com/kb/314984
http://technet.microsoft.com/en-us/library/cc784710(v=ws.10).aspx

QUESTION 62
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Print and Document Services server role installed. You connect a new print device to the network. The marketing department and the sales department will use the print device. You need to provide users from both departments with the ability to print to the network print device. The solution must ensure that if there are multiple documents queued to print, the documents from the sales users print before the documents from the marketing users. What should you do on Server1?

A.    Add two printers. Modify the priorities of each printer and the security settings of each printer.
B.    Add two printers and configure printer pooling.
C.    Add one printer and configure printer pooling.
D.    Add one printer. Modify the printer priority and the security settings.

Answer: A
Explanation:
http://technet.microsoft.com/en-us/library/cc738090(v=ws.10).aspx
To set different print priority to different groups. Open Printers and Faxes. Right-click the printer you want to set, click Properties, and then click the Advanced tab. In Priority, click the up or down arrows, and then click OK. Or, type a priority level, where 1 is the lowest level and 99 is the highest, and then click OK. Click Add Printer to add a second logical printer for the same physical printer. For instructions, see Related Topics. Click the Advanced tab. In Priority, set a priority higher than that of the first logical printer. Instruct the regular group of users to use the first logical printer name and the group with higher priority to use the second logical printer name. Set the appropriate permissions for the different groups.

QUESTION 63
Your network contains an Active Directory domain named contoso.com. The network contains a server named Server1 that runs Window Server 2012 and a server named Server2 that runs Windows Server 2008 R2 Service Pack 1 (SP1). Server1 and Server2 are member server. You need to ensure that you can manage Server2 from Server1 by using Server Manager. Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)

A.    Install Remote Server Administration Tools on Server1.
B.    Install Windows Management Framework 3.0 on Server2.
C.    Install the Windows PowerShell 2.0 engine on Server1.
D.    Install Microsoft .NET Framework 4 on Server2.
E.    Install Remote Server Administration Tools on Server2.

Answer: BD
Explanation:
Explanation:
Windows Server 2012 can manage Windows Server 2012 R2, Hyper-V Server 2012 ,Server 2008 SP2 and Server 2008 R2 SP1.
These instructions explain how to install:
— Install the full installation of Microsoft .NET Framework 4.0 (dotNetFx40_Full_setup.exe) or, install Microsoft .NET Framework 4.5 (dotNetFx45_Full_setup.exe).
— Install Windows Management Framework 3.0.
— Security Note By default, Server Manager and Windows PowerShell remote management is enabled in Windows Server 2012 R2.
http://technet.microsoft.com/en-us/library/hh831456.aspx
http://blogs.technet.com/b/keithmayer/archive/2012/10/02/managing-windows-server-2008-sp2-and-r2-from-windows-server-2012-server-manager.aspx#.UaSV9djxkf8
http://technet.microsoft.com/en-us/library/hh847837.aspx#BKMK_InstallingOnWindows7andWindowsServer2008R2

QUESTION 64
Hotspot Question
You have a DNS server named Server1. Server1 runs Windows Server 2012 R2. The network ID is 10.1.1.0/24. An administrator creates several reverse lookup zones. You need to identify which reverse lookup zone is configured correctly. Which zone should you identify? To answer, select the appropriate zone in the answer area.
641_thumb2

Answer:
642_thumb2

QUESTION 65
Hotspot Question
You have a server named Server1. Server1 runs Windows Server 2012 R2. Server1 has two network adapters. Each network adapter must be configured as shown in the following table.
651_thumb[2]
You need to configure the correct IPv6 address prefix for each network adapter. Which prefix should you select for each network adapter? (To answer, drag the appropriate IPv6 prefix to the correct network adapter in the answer area. Each prefix may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)
652_thumb[3]

Answer:
653_thumb[2]
Explanation:
http://www.iana.org/assignments/ipv6-address-space/ipv6-address-space.xml

QUESTION 66
Drag and Drop Question
Your company has a main office that contains 225 client computers. The client computers are located on a subnet that uses the network ID of 10.10.1.0/24. The company plans to open two branch offices. The offices will be configured as shown in the following table.
661_thumb[2]
You need to select a network prefix for each office to ensure that there are enough IPv4 addresses for each client computer. The solution must minimize the number of unused IP addresses. Which network prefixes should you select? To answer, drag the appropriate network prefix to the correct branch office in the answer area.
662_thumb[2]

Answer:
663_thumb[2]

QUESTION 67
Your infrastructure divided in 2 sites. You have a forest root domain and child domain. There is only one DC on site 2 with no FSMO roles. The link goes down to site 2 and no users can log on. What FSMO roles you need on to restore the access?

A.    Infrastructure master
B.    RID master
C.    Domain Naming master
D.    PCD emulator

Answer: D
Explanation:
D. The PDC emulator is used as a reference DC to double-check incorrect passwords and it also receives new password changes. PDC Emulator is the most complicated and least understood role, for it runs a diverse range of critical tasks. It is a domain-specific role, so exists in the forest root domain and every child domain. Password changes and account lockouts are immediately processed at the PDC Emulator for a domain, to ensure such changes do not prevent a user logging on as a result of multi-master replication delays, such as across Active Directory sites, multi-master directory concept
http://technet.microsoft.com/en-us/library/cc773108(v=ws.10).aspx

QUESTION 68
You perform a Server Core Installation of window Server 2012 R2 on server named Server1. You need to add a graphical user interface (GUI) to server1. Which tool should you use?

A.    the Add-WindowsFeature cmdlet
B.    the Install-Module cmdlet
C.    the setup.exe command
D.    the Add-WindowsPackage cmdlet

Answer: A
Explanation:
A. The Add-WindowsFeature cmdlet allows you to install specified roles, role services, and features.
B. Not a valid cmdlet.
D. Adds a single .cab or .msu file to a Windows image.
Add-WindowsFeature – Allows you to install specified roles, role services, and features.
http://technet.microsoft.com/en-us/library/ee662309.aspx
http://technet.microsoft.com/en-us/library/hh852164.aspx

QUESTION 69
A network technician installs Windows Server 2012 R2 Standard on a server named Server1. A corporate policy states that all servers must run Windows Server 2012 R2 Enterprise. You need to ensure that Server1 complies with the corporate policy. You want to achieve this goal by using the minimum amount of administrative effort. What should you perform?

A.    a clean installation of Windows Server 2012 R2
B.    an upgrade installation of Windows Server 2012 R2
C.    online servicing by using Dism
D.    offline servicing by using Dism

Answer: C
Explanation:
A. Not least effort.
B. Not least effort.
C. dism /online /set-edition.
D. offline would be less ideal and more workex: DISM /online /Set-Edition:ServerEnterprise/ProductKey:489J6-VHDMP-X63PK-3K798-CPX3YWindows Server 2008 R2/2012 contains a command-line utility called DISM (Deployment Image Servicing and Management tool). This tool has many features, but one of those features is the ability to upgrade the edition ofWindows in use. Note that this process is for upgrades only and is irreversible. You cannot set a Windowsimage to a lower edition. The lowest edition will not appear when you run the /Get- TargetEditions option.
If the server is running an evaluation version of Windows Server 2012 R2 Standard or Windows Server 2012 R2 Datacenter, you can convert it to a retail version as follows: If the server is a domain controller, you cannot convert it to a retail version. In this case, install an additionaldomain controller on a server that runs a retail version and remove AD DS from the domain controller thatruns on the evaluation version. From an elevated command prompt, determine the current edition name with the command DISM /online /Get-CurrentEdition. Make note of the edition ID, an abbreviated form of the edition name. Then run DISM /online /Set-Edition:<edition ID> /ProductKey:XXXXXXXXXX-XXXXX-XXXXX- XXXXX/AcceptEula,providing the edition ID and a retail product key. The server will restart twice.
http://technet.microsoft.com/en-us/library/jj574204.aspx
http://technet.microsoft.com/en-us/library/dd744380%28v=ws.10%29.aspx
http://blogs.technet.com/b/server_core/archive/2009/10/14/upgrading-windows-server2008-r2-without-media.aspx
http://communities.vmware.com/people/vmroyale/blog/2012/05/30/howto-upgradingwindows-edition-with-dism

QUESTION 70
You have a domain controller named Server1 that runs Windows Server 2012 R2 and has the DNS Server server role installed. Server1 hosts a DNS zone named contoso.com and a GlobalNames zone. You discover that the root hints were removed from Server1. You need to view the default root hints of Server1. What should you do?

A.    From Event Viewer, open the DNS Manager log.
B.    From Notepad, open the Cache.dns file.
C.    From Windows Powershell, run Get-DNSServerDiagnostics.
D.    From nslookup, run root server1.contoso.com.

Answer: B
Explanation:
A. Allows you to troubleshoot DNS issues.
B. DNS Server service implements root hints using a file, Cache.dns, stored in the systemroot\System32\Dnsfolder on the server.
C. Gets DNS event logging details.
http://technet.microsoft.com/en-us/library/cc758353(v=ws.10).aspx


PassLeader 70-410 Exam Dumps[1]

http://www.passleader.com/70-410.html

QUESTION 71
Your company has a main office and two branch offices. The offices connect to each other by using a WAN link. In the main office, you have a server named Server1 that runs Windows Server 2012 R2. Server1 is configured to use an IPv4 address only. You need to assign an IPv6 address to Server1. The IP address must be private and routable. Which IPv6 address should you assign to Server1?

A.    fe80:ab32:145c::32cc:401b
B.    ff00:3fff:65df:145c:dca8::82a4
C.    2001:ab32:145c::32cc:401b
D.    fd00:ab32:14:ad88:ac:58:abc2:4

Answer: D
Explanation:
nstalling and Configuring Windows Server 2012 R2 Unique local addresses Unique local addresses are IPv6 addresses that are private to an organization in the same way that private addresses–such as 10.x.x.x, 192.168.x.x, or 172.16.0.0 172.31.255.255–can be used on an IPv4 network. Unique local addresses, therefore, are not routable on the IPv6 Internet in the same way that an address like 10.20.100.55 is not routable on the IPv4 Internet. A unique local address is always structured as follows: The first 8 bits are always 11111101 in binary format. This means that a unique local address always begins with FD and has a prefix identifier of FD00::/8.

QUESTION 72
Your network contains an Active Directory domain named contoso.com. All client computers run Windows 8. You deploy a server named Server1 that runs Windows Server 2012 R2. You install a new client-server application named App1 on Server1 and on the client computers. The client computers must use TCP port 6444 to connect to App1 on Server1. Server1 publishes the information of App1 to an intranet server named Server2 by using TCP port 3080. You need to ensure that all of the client computers can connect to App1. The solution must ensure that the application can connect to Server2. Which Windows Firewall rule should you create on Server1?

A.    an inbound rule to allow a connection to TCP port 3080
B.    an outbound rule to allow a connection to TCP port 3080
C.    an outbound rule to allow a connection to TCP port 6444
D.    an inbound rule to allow a connection to TCP port 6444

Answer: D
Explanation:
A. Server2 needs inbound on 3080.
B. All ports outbound allowed by default.
D. Server1 gets request from Client PC’s it needs a inbound rule for 6444.
By default, Windows Firewall with Advanced Security blocks all unsolicited inbound networktraffic, and allows all outbound network traffic. For unsolicited inbound network traffic to reach your computer, you must create an allow rule to permit that type of network traffic. If a network program cannot get access, verify that in the Windows Firewall with Advanced Security snap-in there is an active allow rule for the current profile. To verify that there is an active allow rule, double-click Monitoring and then click Firewall. If there is no active allow rule for the program, go to the Inbound Rules node and create a new rule for that program. Create either a program rule, or a service rule, or search for a group that applies to the feature and make sure all the rules in the group are enabled. To permit the traffic, you must create a rule for the program that needs to listen for that traffic. If you know the TCP or UDP port numbers required by the program, you can additionally restrict the rule to only those ports, reducing the vulnerability of opening up all ports for the program.
http://social.technet.microsoft.com/wiki/contents/articles/13894.troubleshooting-windows-firewall-with-advanced-security-in-windows-server-2012.aspx

QUESTION 73
Your network contains an Active Directory domain named contoso.com. All user accounts in the sales department reside in an organizational unit (OU) named OU1. You have a Group Policy object (GPO) named GPO1. GPO1 is used to deploy a logon script to all of the users in the sales department. You discover that the logon script does not run when the sales users log on to their computers. You open Group Policy Management as shown in the exhibit. You need to ensure that the logon script in GPO1 is applied to the sales users. What should you do?
731_thumb[1]

A.    Enforce GPO1.
B.    Modify the link order of GPO1.
C.    Modify the Delegation settings of GPO1.
D.    Enable the link of GPO1.

Answer: D
Explanation:
D. GPO1 needs to be linked to OU1
http://technet.microsoft.com/en-us/library/cc732979.aspx
http://technet.microsoft.com/en-us/library/cc776004%28v=ws.10%29.aspx#BKMK_icons_link

QUESTION 74
Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. The domain contains a server named Server1. You install the Windows PowerShell Web Access gateway on Server1. You need to provide administrators with the ability to manage the servers in the domain by using the Windows PowerShell Web Access gateway. Which two cmdlets should you run on Server1? (Each correct answer presents part of the solution. Choose two.)

A.    Set-WSManQuickConfig
B.    Set-WSManInstance
C.    Add-PswaAuthorizationRule
D.    Set-BCAuthentication
E.    Install-PswaWebApplication

Answer: CE
Explanation:
A. Configures the local computer for remote management.
B. Modifies the management information that is related to a resource.
C. Adds a new authorization rule to the Windows PowerShell Web Access authorization rule set. D. Specifies the BranchCache computer authentication mode.
E. Configures the Windows PowerShell ® Web Access web Application in IIS.
http://technet.microsoft.com/en-us/library/hh849867.aspx
http://technet.microsoft.com/en-us/library/hh849875.aspx
http://technet.microsoft.com/en-us/library/jj592890(v=wps.620).aspx
http://technet.microsoft.com/en-us/library/hh848404(v=wps.620).aspx
http://technet.microsoft.com/en-us/library/jj592894(v=wps.620).aspx

QUESTION 75
You have a server named Server 1 that runs Windows Server 2012 R2. Server 1 has the Hyper-V server role installed. You have fixed-size VHD named Files.vhd. You need to make the contents in Files.vhd available to several virtual machines. The solution must meet the following requirements:
– Ensure that if the contents are changed on any virtual machine, the changes are not reflected on the other virtual machines.
– Minimize the amount of disk space used.
What should you do?

A.    Create a fixed-size VHDX. Transfer the information from Files.vhd to the new VHDX file.
B.    Convert Files.vhd to a dynamically expanding VHD.
C.    Create a dynamically expanding VHDX. Transfer the information from Files.vhd to the new VHDX file.
D.    Create differencing VHDs that use Files.vhd as the parent disk.

Answer: D
Explanation:
A. A conversion would be needed from VHD to VHDX. Not available to multiple VM’s.
B. Single VHD not available to multiple VM’s. Changes wouldn’t be reflected.
C. A conversion would be needed from VHD to VHDX. Not available to multiple VM’s.
D. Child disk for multiple VM’s with Files.vhd as parent A differencing disk is associated with another virtual hard disk that you select when you create the differencing disk. This means that the disk to which you want to associate the differencing disk must exist first. This virtual hard disk is called the “parent” disk and the differencing disk is the “child” disk.
The parent disk can be any type of virtual hard disk. The differencing disk stores all changes that would otherwise be made to the parent disk if the differencing disk was not being used. The differencing disk provides an ongoing way to save changes without altering the parent disk. You can use the differencing disk to store changes indefinitely, as long as there is enough space on the physical disk where the differencing disk is stored. The differencing disk expands dynamically as data is written to it and can grow as large as the maximum size allocated for the parent disk when the parent disk was created.
http://technet.microsoft.com/en-us/library/cc720381(v=ws.10).aspx

QUESTION 76
Your network contains an Active Directory domain named adatum.com. The domain contains several thousand member servers that run Windows Server 2012 R2. All of the computer accounts for the member servers are in an organizational unit (OU) named ServersAccounts. Servers are restarted only occasionally. You need to identify which servers were restarted during the last two days. What should you do?

A.    Run dsquery computer and specify the -stalepwd parameter.
B.    Run dsquery server and specify the -o parameter.
C.    Run Get-ADComputer and specify the lastlogon property.
D.    Run Get-ADComputer and specify the SearchScope parameter.

Answer: C
Explanation:
A. dsquery computer -stalepwdnumber_of_days – Searches for all computers that have not changed theirpassword for the specified number_of_days.
B. dsquery server -o {dn | rdn | samid} – Specifies the format in which the list of entries found by the search willbe displayed: dn distinguished name of each entry, default; rdn relative distinguished name of each entry; samid SAM account name of each entry computer group server user; upn user principal name of each entryuser.
C. Gets one or more Active Directory computers lastLogondate should be used.
D. SearchScope specifies the scope of an Active Directory search. Possible values for this parameter are:
— Base or 0; OneLevel or 1; Subtree or 2 – A Base query searches only the current path or object.
— A One Level query searches the immediate children of that path or object.
— A Subtree query searches the current path orobject and all children of that path or object.
http://technet.microsoft.com/en-us/library/ee617192.aspx
http://technet.microsoft.com/en-us/library/cc732952(v=ws.10).aspx

QUESTION 77
Your network contains three servers that run Windows Server 2012 R2. The servers are configured as shown in the following table (click Exhibit). Server3 is configured to obtain an IP address automatically. You need to ensure that Server3 only receives an IP address from Server1. The IP address must always be the same. Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
771_thumb[2]

A.    Create an exclusion on Server1.
B.    Create a filter on Server1.
C.    Create a reservation on Server2.
D.    Create a reservation on Server1.
E.    Create a filter on Server2.

Answer: DE
Explanation:
A. Exclude range of IP’s for lease.
B. Wrong Server.
C. Wrong Sever.
D. For clients that require a constant IP address, you can either manually configure a static IP address,or assign a reservation on the DHCP server.
E. DHCP Deny Filter at Server2 to exclude MAC address of Server3 MAC address filterEnable and define an explicit allow list. The DHCP server provides DHCP services only to clients whose MACaddresses are in the allow list. Any client that previously received IP addresses is denied address renewal if its MAC address isn’t onthe allow list.
Enable and define an explicit deny list. The DHCP server denies DHCP services only to clients whose MACaddresses are in the deny list. Any client that previously received IP addresses is denied address renewal if its MAC address is on thedeny list. Enable and define an allow list and a block list. The block list has precedence over the allow list. This means that the DHCP server provides DHCPservices only to clients whose MAC addresses are in the allow list, provided that no corresponding matchesare in the deny list. If a MAC address has been denied, the address is always blocked even if the address is on the allowlist.
http://technet.microsoft.com/en-us/library/cc754537(v=ws.10).aspx
http://technet.microsoft.com/en-us/magazine/ff521761.aspx
http://technet.microsoft.com/en-us/library/cc779507(v=ws.10).aspx

QUESTION 78
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2 and a client computer named Computer1 that runs Windows 8. DC1 is configured as a DHCP server as shown in the exhibit. (Click the Exhibit button.) Computer1 is configured to obtain an IP address automatically. You need to ensure that Computer1 can receive an IP address from DC1. What should you do?
781_thumb[2]

A.    Disable the Allow filters.
B.    Disable the Deny filters
C.    Activate Scope [10.1.1.0] Contoso.com.
D.    Authorize dc1.contoso.com.

Answer: D
Explanation:
Red down arrow indicates a unauthorized DHCP server A DHCP server that is a domain controller or a member of an Active Directory domain queries Active Directoryfor the list of authorized servers (identified by IP address). If its own IP address is not in the list of authorized DHCP servers, the DHCP Server service does not completeits startup sequence and automatically shuts down.
http://technet.microsoft.com/en-us/library/cc754792.aspx
http://technet.microsoft.com/en-us/library/ee941131(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/gg722802(v=ws.10).aspx
http://pc-addicts.com/server-2012-dhcp-server-role/

QUESTION 79
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named Server1 that has the DNS Server server role installed. Server1 hosts a primary zone for contoso.com. The domain contains a member server named Server2 that is configured to use Server1 as its primary DNS server. From Server2, you run nslookup.exe as shown in the exhibit. (Click the Exhibit button.) You need to ensure that when you run Nslookup, the correct name of the default server is displayed. What should you do?
791_thumb[2]

A.    From Advanced TCP/IP Settings on Server1, add contoso.com to the DNS suffix list.
B.    On Server1, modify the Security settings of the contoso.com zone.
C.    On Server1, create a reverse lookup zone.
D.    From Advanced TCP/IP Settings on Server2, add contoso.com to the DNS suffix list.

Answer: C
Explanation:
C. Make sure that a reverse lookup zone that is authoritative for the PTR resource record exists. For more information about adding a reverse lookup zone, see “Adding a Reverse Lookup Zone”.
http://technet.microsoft.com/en-us/library/cc961417.aspx

QUESTION 80
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that hosts the primary DNS zone for contoso.com. All client computers are configured to use DC1 as the primary DNS server. You need to configure DC1 to resolve any DNS requests that are not for the contoso.com zone by querying the DNS server of your Internet Service Provider (ISP). What should you configure?

A.    Name server (NS) records
B.    Condition& forwarders
C.    Forwarders
D.    Naming Authority Pointer (NAPTR) DNS resource records (RR)

Answer: C
Explanation:
A. Specifies a name server for the domain, which allows DNS lookups within various zones. Each primary andsecondary name server should be declared through this record.
B. http://windowsitpro.com/networking/q-whats-conditional-dns-forwarding
C. manage the Domain Name System (DNS) traffic between your network and the Internet.
D. Configure forwarders to send DNS queries directly to your ISP’s DNS server or other DNS servers. Most of the time, when you configure forwarders, DNS performance and efficiency increases, but thisconfiguration can also introduce a point of failure if the forwarding DNS server is experiencing problems.
A forwarder is a Domain Name System (DNS) server on a network used to forward DNS queries for externalDNS names to DNS servers outside of that network. A DNS server on a network is designated as a forwarder by having the other DNS servers in the networkforward the queries they cannot resolve locally to that DNS server. By using a forwarder, you can manage name resolution for names outside of your network, such as names onthe Internet, and improve the efficiency of name resolution for the computers in your network.
http://social.technet.microsoft.com/Forums/en-US/winserverNIS/thread/2f35cae2-341c4bfe-9dac-724ddace6d51/
http://technet.microsoft.com/en-us/library/cc722542.aspx
http://technet.microsoft.com/en-us/library/cc754931.aspx


PassLeader 70-410 Exam Dumps

http://www.passleader.com/70-410.html